FEATURE
①Dimension 25.4 x 22.1 x 13.2mm, pypical
②Low Phase Noise
③Small SMD Package
④Tight Frequency Stability
⑤Low Power Consumption
⑥Fast Warm-up Time
⑦Electrical Frequency Tuning Input
⑧Reference Voltage Output
⑨RoHS-Compliant (lead-free)
TYPICAL APPLICATION
①Instrument Reference
②Microwave Communication
③Clock Reference for Microwave Signal Source
④Test & Measurement
⑤Telecom Systems
⑥Radar Systems
Type :
AG3Model :
POC2522Package size :
25.4*22.1*13.2mmFrequency :
10.000M~100.000MOven Controlled Crystal Oscillator(OCXO) POC2522
The POC2522-MHz series by Zhejiang A-Crystal is a high-performance SMD OCXO (Oven-Controlled Crystal Oscillator) with a frequency range of 10.0MHz to 100.0MHz, featuring ±0.1ppm initial accuracy and ultra-low phase noise (-170dBc/Hz). Compact in size (25.4×22.1×13.2mm), it operates across a wide temperature range (-45℃ to +90℃), making it ideal for microwave communications, radar systems, and precision instruments. Key features include voltage-controlled frequency tuning (±0.4ppm), fast warm-up (5-minute stabilization), and low power consumption (2.0W steady-state). Compliant with RoHS standards.
1. ELECTRICAL SPECIFICATIONS
| No. | Item | Electrical Specification | Remark | |||||
| Min. | Type | Max. | Units | |||||
| OUTPUT (PIN = “R.F. OUTPUT”) | ||||||||
| 1 | Nominal Frequency | 10.000 | 100.000 | MHz | ||||
| 2 | Initial Accuracy | -0.1 | +0.1 | ppm | @ +25 ±1°C,after turn on power 60 minutes,Vco=+5V | |||
| 3 | Waveform | Sine wave | ||||||
| 4 | Level | +8 | +10 | +12 | dBm | |||
| 5 | Load | 50 | Ω | |||||
| 6 | Harmonics | -30 | dBc | |||||
| 7 | Spurious | -100 | dBc | |||||
| FREQUENCY STABILITY | ||||||||
| 8 | Ambient | ±5 | ±100 | ppb | referenced to 25°C | |||
| 9 | Aging | Daily | -0.5 | +0.5 | ppb | after 30 days of continuous operation. | ||
| yearly | -50 | +50 | ppb | |||||
| 10years | -0.3 | +0.3 | ppm | |||||
| 10 | Voltage | -0.1 | +0.1 | ppb | ±5% change | |||
| 11 | Short term | 0.002 | ppb | root Allan variance for τ=1 sec | ||||
| 12 | Load | -1 | +1 | ppb | ±5% change | |||
| 13 | Warm-up | -50 | +50 | ppb | in 5 minutes @ +25 ±1°C, referenced to 1 hour | |||
| 14 | Phase Noise | Option A | Option B | Option C | Refer to Table 1 : Ordering Information | |||
| @1Hz | -105 | -110 | -115 | dBc/Hz | ||||
| @10Hz | -135 | -140 | -142 | dBc/Hz | ||||
| @100Hz | -155 | -155 | -155 | dBc/Hz | ||||
| @1KHz | -165 | -165 | -165 | dBc/Hz | ||||
| @10KHz | -170 | -170 | -170 | dBc/Hz | ||||
| @100KHz | -170 | -170 | -170 | dBc/Hz | ||||
| @1MHz | -170 | -170 | -170 | dBc/Hz | ||||
| ELECTRICAL FREQUENCY ADJUSTMENT (PIN = “VCO INPUT”) | ||||||||
| 15 | Tuning Range | ±0.4 | ppm | Referenced to frequency at nominal Center Voltage | ||||
| 16 | Control Voltage | +0.5 | +9.5 | V | ||||
| 17 | Slope | Positive | ||||||
| 18 | Center Voltage | +5.0 | V | |||||
| 19 | Linearity | -10 | 10 | % | ||||
| * Sufficient to adjust the oscillator to nominal frequency for 10 years. Some unit will have ±0.7ppm tuning range. | ||||||||
| INPUT POWER (PIN = “+VDC”) | ||||||||
| 20 | Voltage | +11.4 | +12 | +12.6 | V | |||
| 21 | Current | Steady State | 2.0 | W | @ +25°C, operating -20°C ~ +70°C | |||
| 2.3 | @ +25°C, operating -40°C ~ +85°C | |||||||
| 22 | During Warm-Up | 400 | mA | @ +25°C, operating -20°C ~ +70°C | ||||
| 500 | @ +25°C, operating -40°C ~ +85°C | |||||||
| REFERENCE VOLTAGE (PIN = "REFERENCE VOLTAGE") | ||||||||
| 23 | Voltage | +9.25 | +9.5 | +9.75 | V | |||
| 24 | Source Resistance | 100 | Ω | |||||
| 25 | Load Impedance | 10 | KΩ | |||||
| ENVIRONMENTAL | ||||||||
| 26 | Operable Temperature | -45 | +90 | ℃ | ||||
| 27 | Storage Temperature | -50 | +95 | ℃ | ||||
| 28 | Humidity | MIL-STD-202, Method 103 Test Condition A | 95% RH @ +40°C,non-condensing,240 hours | |||||
| 29 | Vibration (non-operating) | MIL-STD-202, Method 201 | 0.06” Total p-p, 10 to 55 Hz | |||||
| 30 | Shock (non-operating) | MIL-STD-202, Method 213, Test Condition J | 30g, 11ms, half-sine | |||||
| 31 | Package type | 25.4*22.1*13.2 | ||||||
| Note 1: Output maintained over this temperature range. Other requirements of this specification may not be met when operating outside the temperature range in -40~85℃. Note 2: Test conditions: VDC = +12 V; VCO = +5 V; at +25 ± 3°C unless otherwise identified. |
||||||||
2. Dimension (Unit: mm)
3.For more FAQs and other services, please click on the image below to view.
Features ①Dimension 9.7 x 7.5mm, miniaturized 4-Pad SMD package ②Low Power Consumption ③±20 ppbstability over -40 to 85°C ④Stratum 3 (Overall ±4.6 ppm including 20 years aging.) Application ①Small Cell, Portable Telecommunication Device ②Test and Instrumentation ③Synthesizer , Digital switch , Reference Timing Circuit ④Packet Timing Protocol (e.g. IEEE-1588)
Read More
Features ①Dimension 14.5 x 9.6 x 6.5mm, pypical ②6-Pin SMD Package ③±30 ppb stability over -40 to 85°C ④Stratum 3 (Overall ±4.6 ppm including 20 years aging.) ⑤Frequency Range, 10 MHz to 40MHz TYPICAL APPLICATION ①SDH/SONET, Telecommunication Base Station ②Test and Measurement Equipment ③Synthesizer , Digital switch , Reference Timing Circuit ④Packet Timing Protocol (e.g. IEEE-1588)
Read More
FEATURE ①Dimension 20.4 x 12.8 x 11mm, pypical ②Low Phase Noise & Low G-Sensitivity ③Small Hermetically Sealed Package ④Tight Frequency Stability ⑤Low Power Consumption ⑥Fast Warm-up Time ⑦Electrical Frequency Tuning Input ⑧RoHS-Compliant (lead-free) TYPICAL APPLICATION ①Instrument Reference ②Microwave Communication ③Clock Reference for Microwave Signal Source ④Test & Measurement ⑤Telecom Systems ⑥Radar Systems
Read More
FEATURE ①Dimension 20.6 x 20.6 x 11mm, pypical ②SC Cut Crystal. TYPICAL APPLICATION ①SDH/SONET, Telecommunication base station ②Test and measurement equipment ③Synthesizer, Digital switch, Reference Timing Circuit
Read More
FEATURE ①Dimension 25.4 x 22.1 x 13.2mm, pypical ②Low Phase Noise ③Small SMD Package ④Tight Frequency Stability ⑤Low Power Consumption ⑥Fast Warm-up Time ⑦Electrical Frequency Tuning Input ⑧Reference Voltage Output ⑨RoHS-Compliant (lead-free) TYPICAL APPLICATION ①Instrument Reference ②Microwave Communication ③Clock Reference for Microwave Signal Source ④Test & Measurement ⑤Telecom Systems ⑥Radar Systems
Read More
FEATURE ①Design for Application of Exceptional Frequency Stability and Timing ②Aging Performance a.±0.05 ppb/day b.±10 ppb/Year c.±50 ppb/10 Years TYPICAL APPLICATION ①Instrument Reference ②Data Communication ③Test & Measurement ④Telecom Systems ⑤GPS
Read More
FEATURE ①Ultra Low Phase Noise & Low G-Sensitivity ②Hermetically Sealed Package ③Tight Frequency Stability ④Low Power Consumption ⑤Fast Warm-up Time ⑥Electrical Frequency Tuning Input ⑦Reference Voltage Output ⑧RoHS-Compliant (lead-free) TYPICAL APPLICATION ①Instrument Reference ②Microwave Communication ③Clock Reference for Microwave Signal Source ④Test & Measurement ⑤Telecom Systems ⑥Radar Systems ⑦Medical (MRT)
Read More
IPv6 network supported
