FEATURE
①Ultra Low Phase Noise & Low G-Sensitivity
②Hermetically Sealed Package
③Tight Frequency Stability
④Low Power Consumption
⑤Fast Warm-up Time
⑥Electrical Frequency Tuning Input
⑦Reference Voltage Output
⑧RoHS-Compliant (lead-free)
TYPICAL APPLICATION
①Instrument Reference
②Microwave Communication
③Clock Reference for Microwave Signal Source
④Test & Measurement
⑤Telecom Systems
⑥Radar Systems
⑦Medical (MRT)
Type :
AG5Model :
POC2525Package size :
25.4*25.4*12.8mmFrequency :
5.000M~120.000MOven Controlled Crystal Oscillator(OCXO) POC2525
The POC2525-MHz series OCXO (temperature-controlled Crystal oscillator) launched by Zhejiang A-Crystal has a frequency range of 5.0M to 120.000MHz, featuring ultra-low phase noise (-100 DBC/Hz@10Hz) and excellent frequency stability (±0.3ppm initial accuracy). The product adopts SMD 2525 packaging and supports electrical frequency modulation (±2.5ppm), and is suitable for high-precision fields such as microwave communication, radar systems, and medical equipment. Features include fast startup (stable within 5 minutes), low power consumption (2.1W), compliance with RoHS standards, and passing MIL-STD environmental tests to ensure industrial-grade reliability.
1. ELECTRICAL SPECIFICATIONS
No. | Item | Electrical Specification | Remark | |||||
Min. | Type | Max. | Units | |||||
OUTPUT (PIN = “R.F. OUTPUT”) | ||||||||
1 | Nominal Frequency | 5.000 | 120.000 | MHz | ||||
2 | Initial Accuracy | -0.3 | +0.3 | ppm | @ +25 ±1°C,after turn on power 60 minutes,Vco=+5V | |||
3 | Waveform | Sine wave | ||||||
4 | Level | +15 | dBm | |||||
5 | Load | 50 | Ω | ±10% | ||||
6 | Harmonics | -30 | dBc | |||||
7 | Spurious | -100 | dBc | |||||
FREQUENCY STABILITY | ||||||||
8 | Ambient | ±50 | ±500 | ppb | referenced to 25°C | |||
9 | Aging | Daily | -5 | +5 | ppb | After 30 days. | ||
yearly | -200 | +200 | ppb | |||||
15 years | -2 | +2 | ppm | |||||
10 | Voltage | -5 | +5 | ppb | ±5% change | |||
11 | Short term | 0.05 | ppb | root Allan variance for τ=1 sec | ||||
12 | Load | -5 | +5 | ppb | ±10% change | |||
13 | Warm-up | -50 | +50 | ppb | in 5 minutes @ +25 ±1°C, referenced to 1 hour | |||
14 | G-Sensitivity (each axis) | 1 | Ppb/g | |||||
15 | Phase Noise | Option A | Option B | Refer to Table 1 : Ordering Information | ||||
@10Hz | -100 | -105 | dBc/Hz | |||||
@100Hz | -130 | -135 | dBc/Hz | |||||
@1KHz | -157 | -162 | dBc/Hz | |||||
@10KHz | -180 | -180 | dBc/Hz | |||||
@100KHz | -185 | -185 | dBc/Hz | |||||
@1MHz | -185 | -185 | dBc/Hz | |||||
ELECTRICAL FREQUENCY ADJUSTMENT (PIN = “VCO INPUT”) | ||||||||
16 | Tuning Range | ±2.5 | ppm | Referenced to frequency at nominal Center Voltage | ||||
17 | Control Voltage | 0 | +10 | V | ||||
18 | Slope | Positive | ||||||
19 | Center Voltage | +5 | V | |||||
20 | Linearity | -10 | +10 | % | ||||
* Sufficient to adjust the oscillator to nominal frequency for 10 years. Some unit will have ±0.7ppm tuning range. | ||||||||
INPUT POWER (PIN = “+VDC”) | ||||||||
21 | Voltage | +4.75 | +5 | +5.25 | V | |||
22 | Current | Steady State | 2.1 | W | @ +25°C | |||
23 | During Warm-Up | 950 | mA | @ +25°C | ||||
ENVIRONMENTAL | ||||||||
24 | Operable Temperature | -40 | +85 | ℃ | ||||
25 | Storage Temperature | -55 | +105 | ℃ | ||||
26 | Humidity | MIL-STD-202, Method 103 Test Condition A | 95% RH @ +40°C,non-condensing,240 hours | |||||
27 | Vibration (non-operating) | MIL-STD-202, Method 201 | 0.06” Total p-p, 10 to 55 Hz | |||||
28 | Shock (non-operating) | MIL-STD-202, Method 213, Test Condition J | 30g, 11ms, half-sine | |||||
29 | Package type | 25.4*25.4*12.8 | ||||||
Note 1: Output maintained over this temperature range. Other requirements of this specification may not be met when operating outside the temperature range in -40~85℃. Note 2: Test conditions: VDC = +5 V; VCO = +5 V; at +25 ± 3°C unless otherwise identified. |
2. Dimension (Unit: mm)
3.For more FAQs and other services, please click on the image below to view.